普光气田含硫污水尾气处理工艺应用与优化

针对中国石化普光气田产出水属于典型的含硫污水,密闭处理系统中产生大量高含硫尾气,论述了尾气处理工艺中存在的问题,优化了单一的生物除硫、活性炭吸附工艺,增加了一级碱洗、氧化除硫工艺,实现尾气达标排放。     

规划环境影响评价中公众参与探讨研究

公众参与作为规划环境影响评价的重要组成部分,具有重要的作用和意义。公众参与可以提高规划环境影响评价的有效性、提高规划的合理性及环保性。结合规划环评的应用实例,归纳了规划环评公众参与的参与对象、参与形式等,指出目前规划环评公众参与在应用中存在公众参与对象局限、规定和程序不明确、公民环保意识差等问题,建议采用多种形式开展公众参与环评,同时建议相关部门制定法律条文等进一步明确公众参与环评的规定和程序,提高信息公开度和民众的环保意识。     

TiO2/硅藻土光催化氧化降解甲基橙的研究

使用经过预处理的硅藻土做载体,采用溶胶-凝胶法制备硅藻土负载二氧化钛光催化剂,利用XRD和EDS对其进行表征.通过分析光催化反应的主要影响因素,研究了硅藻土负载二氧化钛光催化剂对甲基橙的催化降解效果.结果表明：负载3次,在550℃焙烧2h,制备出的负载型催化剂催化活性较高,催化剂上的TiO2为锐钛矿结构.当催化剂投加量为lg/L,溶液初始浓度为15 mg/L,pH为3,H2O2为2 mmol/L时,对甲基橙的降解效果达到最佳.     

电感耦合等离子体质谱法测定地表水中铊的研究

本研究建立了电感耦合等离子体质谱法(ICP-MS)测定地表水中铊的方法。对仪器工作条件进行了优化,用在线内标校正基体效应的干扰,重点考察了样品测定介质、酸度、共存元素干扰等因素对测定结果的影响。在最佳实验条件下,该方法的检出限可达0.003μg/L,线性相关系数不小于0.999 9,加标回收率为93%~110%。与传统的原子吸收法相比,该方法不需要富集等繁琐的前处理过程,具有检出限低、快速、精密度和准确度高等优点。     

微纳米气泡改善杭州城市河道水生态环境的工程应用研究

于2013年4月至6月在杭州城市河道对微纳米气泡改善河道水生态环境进行了持续的原位监测实验.结果表明,与对照区相比,试验区水体温度平均升高0.7℃,pH增大0.2,溶解氧增加1.0 mg/L,而TDS浓度降低42 mg/L;水质污染指标高锰酸盐指数、总氮、氨氮、总磷平均浓度分别降低了8.45 mg/L、6.78 mg/L、8.90 mg/L和0.58 mg/L.由此可推测微纳米气泡在一定程度上能有效净化水质,为恢复良好水生生态环境提供新的方法和技术手段.     

中国典型城市环境空气质量变化趋势分析研究

文章选取北京市、兰州市、乌鲁木齐市、青岛市、武汉市、深圳市这六个典型城市为研究对象,利用2003年-2013年六个城市的SO2、NO2和PM10浓度数据,计算出区域空气综合污染指数和污染负荷指数,并采用Daniel趋势检验法分析主要污染物的变化趋势.结果表明,六个典型城市环境空气质量状况从优至差排列依次为深圳、青岛、武汉、北京、兰州、乌鲁木齐;六个典型城市空气首要污染物为PM10,SO2的污染负荷呈下降趋势,NO2的污染负荷呈上升趋势;各城市的空气质量整体呈现好转趋势,表明大气治理初见成效.     

亚甲基蓝分光光度法测定废水硫化物的不确定度评定研究

分析了应用亚甲基蓝分光光度(GB/T16489-1996)测定废水硫化物测试过程中不确定度影响因素,主要来源为硫化物标准溶液、标准曲线拟合、随机效应、分光光度计和取样体积这五部分。本测量合成相对标准不确定度0.025 9;其中由测定样品质量引入的不确定度为0.024 7;由样品体积引入的不确定度为0.007 7。本次废水中硫化物测量结果为:0.110±0.006 mg/L,k=2(包含概率约为95%)。     

清河流域水环境质量监测与评价研究

近年来,随着全球各地城市化和工业化进程的不断加快,以及人类对河流水生态系统资源的不合理、掠夺式利用,河流水生态系统遭到严重破坏,各地河流相继出现水质恶化、水文条件改变、物种多样性退化、生境条件恶劣等诸多问题。文章对辽河主要支流清河水生态系统的水质状况进行了研究,并于2012年6月,对清河流域22个监测断面水质状况进行了实地调查,对其水质状况进行了评价,结果表明:22个监测断面中,达到Ⅲ类水质断面的有8个,Ⅳ类7个,Ⅴ类1个,劣Ⅴ类6个。其中6个劣Ⅴ类断面分别因氟化物、氨氮、总磷浓度超标而为劣Ⅴ类。     

Quantitative method to determine the regional drinking water odorant regulation goals based on odor sensitivity distribution：Illustrated using 2-MIB

Taste and odor （T/O） in drinking water often cause consumer complaints and are thus regulated in many countries. However, people in different regions may exhibit different sensitivities toward WO. This study proposed a method to determine the regional drinking water odorant regulation goals （ORGs） based on the odor sensitivity distribution of the local population. The distribution of odor sensitivity to 2-methylisobomeol （2-MIB） by the local population in Beijing, China was revealed by using a normal distribution function/model to describe the odor complaint response to a 2-MIB episode in 2005, and a 2-MIB concentration of 12.9 ng/L and FPA （flavor profile analysis） intensity of 2.5 was found to be the critical point to cause odor complaints. Thus the Beijing ORG for 2-MIB was determined to be 12.9 ng/L. Based on the assumption that the local FPA panel can represent the local population in terms of sensitivity to odor, and that the critical FPA intensity causing odor complaints was 2.5, this study tried to determine the ORGs for seven other cities of China by performing FPA tests using an FPA panel from the corresponding city. ORG values between 12.9 and 31.6 ng/L were determined, showing that a unified ORG may not be suitable for drinking water odor regulations. This study presents a novel approach for setting drinking water odor regulations.     

Review on water leakage control in distribution networks and the associated environmental benefits

Water supply is the primary element of an urban system. Due to rapid urbanization and water scarcity, maintaining a stable and safe water supply has become a challenge to many cities, whereas a large amount of water is lost from the pipes of distribution systems. Water leakage is not only a waste of water resources, but also incurs great socio-economic costs. This article presents a comprehensive review on the potential water leakage control approaches and specifically discusses the benefits of each to environmental conservation. It is concluded that water leakage could be further reduced by improving leakage detection capability through a combination of predictive modeling and monitoring instruments, optimizing pipe maintenance strategy, and developing an instant pressure regulation system. The environment could benefit from these actions because of water savings and the reduction of energy consumption as well as greenhouse gas emissions.